Tilt Function; Sliding Function; Anti-Entrapment Function - Subaru 2010 Tribeca Owner's Manual

2-26
Keys and doors
& Tilt function
1) Tilt switch
2) Raise
3) Lower
The tilting function will only operate when
the moonroof is fully closed.
Push the rear side of the "Tilt" switch to
raise the moonroof.
Push the front side of the "Tilt" switch to
lower the moonroof.
Release the switch after the moonroof has
been raised or has been lowered com-
pletely. Pushing the switch continuously
may cause damage to the moonroof.
NOTE
One-touch operation does not take
place when the moonroof is raised or
lowered. Push the switch continuously
to raise or lower the moonroof.
& Sliding function
1) Open/Close switch
2) Open
3) Close
Push the "Open/Close" switch rearward to
open the moonroof. The sun shade will
also be opened together with the moon-
roof.
Push the "Open/Close" switch forward to
close the moonroof. The moonroof will
stop halfway. Push it again to close the
moonroof completely.
To stop the moonroof at a selected mid-
way position while opening or closing it,
momentarily push the switch to the
"OPEN" or "CLOSE" side.
After washing the vehicle or after it rains,
wipe away water on the roof prior to
opening the moonroof to prevent drops
of water from falling into the passenger
compartment.
& Anti-entrapment function
When the moonroof senses a substantial
enough object trapped between its glass
and the vehicle's roof during closure, it
automatically moves back to either of the
following positions according to the point
at which it senses the object.
. When the moonroof senses the object
at a point between the halfway stop
position and fully closed position, it moves
back to the halfway stop position and
stops there.
. When the moonroof senses the object
at a point between the halfway stop
position and fully open position, it moves
back to the fully open position and stops
there.
The anti-entrapment function may also be
activated by a strong shock on the moon-
roof even when there is nothing trapped.