Hazard Warning Flasher; Meters And Gauges; Combination Meter Illumination - Subaru 2012 Impreza Owner's Manual

following conditions.
. when the ignition switch is turned to the
"ON" position
. when all doors and the rear gate (5-
door) are locked using the remote keyless
entry transmitter

Hazard warning flasher

The hazard warning flasher is used to
warn other drivers when you have to park
your vehicle under emergency conditions.
The hazard warning flasher works regard-
less of the position of the ignition switch.
To turn on the hazard warning flasher,
push the hazard warning button on the
instrument panel. To turn off the flasher,
push the button again.
NOTE
When the hazard warning flasher is on,
the turn signals do not work.
Instruments and controls

Meters and gauges

NOTE
Liquid-crystal displays are used in
some of the meters and gauges on
the combination meter. You will find
their indications hard to see if you wear
polarized glasses.
& Combination meter illumina-
tion
When the ignition switch is turned to the
"ON" position, the various parts of the
combination meter are illuminated in the
following sequence.
1. Warning lights, indicator lights, meter
needles, gauge needles and liquid crystal
display illuminate.
2. Meter and gauge indications each
show MAX position.
3. Meter and gauge indications each
show MIN position.
4. Regular illumination (for driving) be-
gins.
– CONTINUED –
3-5