Screen Settings - Subaru 2012 Impreza Owner's Manual

3-44
Instruments and controls
4. Select an item by operating the "
" " switch, and then pull the " /SET"
switch toward you.
5. Select "Set" by operating the "
switch, and confirm the setting by pulling
the " /SET" switch toward you.
" or
6. The system will notify you that the
setting is complete for approximately 3
seconds.
& Screen settings
The items in the screen settings can be
set. To change the items, operate the "
or " " switch, and then pull the " /SET"
switch toward you.
! Preparation for screen settings
1. Turn the ignition switch to the "ON"
position and pull the " /SET" switch
toward you for more than 2 seconds.
"
2. After the selection screen is displayed,
operate the " " or " " switch to show the
"Screen Setting" item. Then, pull the " /
SET" switch toward you.
! Top display setting
"
1. Perform the preparation steps accord-
ing to "Preparation for screen settings"
F3-44.