Subaru 2012 Impreza Owner's Manual page 164

3-50
Instruments and controls
6. The system will notify you that the
setting is complete for approximately 3
seconds.
! Bypass screen setting
1. Perform the preparation steps accord-
ing to "Preparation for screen settings"
F3-44.
2. Operate the " " or "
select the "Bypass Screen" item, and then
pull the " /SET" switch toward you.
3. Select the item to set by operating the
" " or " " switches, and then pull the " /
SET" switch toward you.
" switch to 4. Select "On" or "Off" by operating the
" " or " " switch, and pull the " /SET"
switch toward you.
If you want to change setting for another
item, repeat steps 3 and 4.
5. Select "Set" by operating the " " or