Subaru 2012 Impreza Owner's Manual page 171

toward you for more than 2 seconds.
2. After the selection screen is displayed,
operate the " " or " " switch to show the
"Car Setting" item. Then, pull the " /SET"
switch toward you.
! Hazard warning flasher setting
1. Perform the preparation steps accord-
ing to "Preparation for car settings" F3-56.
2. Operate the " " or "
select the "Hazard Warning Flasher" item,
and then pull the " /SET" switch toward
you.
3. The current setting is displayed. Pull
the " /SET" switch toward you to enter
Instruments and controls
the selection mode.
" switch to
4. Select "On" or "Off" by operating the
" " or " " switch, and then pull the " /
SET" switch toward you.
5. Select "Set" by operating the "
switch, and confirm the setting by pulling
3-57
"
– CONTINUED –