Subaru 2012 Impreza Owner's Manual page 168

3-54
Instruments and controls
2. Operate the " " or "
select the "On/Off" item, and then pull the
" /SET" switch toward you.
3. The current setting is displayed. Pull
the " /SET" switch toward you to enter
the selection mode.
" switch to 4. Select "On" or "Off" by operating the
" " or " " switch, and then pull the " /
SET" switch toward you.
5. Select "Set" by operating the "
switch, and confirm the setting by pulling
the " /SET" switch toward you.
6. The system will notify you that the
setting is complete for approximately 3
seconds.
! Clear setting
1. Perform the preparation steps accord-
ing to "Preparation for maintenance set-
tings" F3-52.
"