Powering Up The Unit - Panasonic EP1273 Operating Instructions Manual

Household massage lounger
Hide thumbs Also See for EP1273:
Table of Contents

Advertisement

HOW TO MOVE THE UNIT
Move it slowly
Wheels

POWERING UP THE UNIT

ATTACHING THE BACK CUSHION, PILLOW AND REAR LEG COVER
1. Attach the back cushion using the
zipper.
2. Attach the pillow using the fasteners.
8
CAUTION
• Do not move the unit while someone is seated on it.
Failure to do so may cause the unit to tip over, which may lead
to damage or injury.
Using the wheels to move the unit
• Grasp the legrest to move the unit when using the wheels.
• It is easier to move the unit with the massage heads retracted and
the backrest in the upright position.
Hold
* Place a mat or cloth on the floor and move the unit slowly to
the legrest.
prevent floor damage.
Lifting the Unit
• Move the chair by having one person hold the legrest and another
person use the handles on the back.
* Please hold the handles and legrest securely to avoid dropping
the unit as it may damage your floor.
1. Plug the power plug into an electrical outlet.
1
2. Verify that the lock switch key is turned to the
"open" position.
• If in "lock" position, turn the lock switch key to "open".
3. Slide the power switch to the "on" position.
2
3
3. Attach the rear leg cover.
4" (10cm)
* Do not step on the attached rear leg cover.
• Place cover against
chair approx. 4 in.
(10 cm) above pipe
section.
• Slide cover down to
position shown by
broken line.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents