Automatic Power-Switching Function; Changing The Auto Standby Setting - Yamaha RX-V765 Owner's Manual

AUTOMATIC POWER-SWITCHING FUNCTION

This function automatically switches the unit between standby and power-on modes.
- The subwoofer automatically places itself in standby mode if it does not receive an input signal for 7 or 8 minutes (the
status indicator lights red).
- When the subwoofer detects a bass signal input of below 200 Hz, it automatically places itself in power-on mode (the
status indicator lights green).
1
Set the subwoofer to standby.
2
Change the AUTO STANDBY setting.
- LOW: Normally select this position to activate this function.
- HIGH: If this function does not operate with AUTO STANDBY switch set to LOW, select this position so that the
subwoofer detects input signals with a lower level and switches the power on automatically.
- OFF: Select this position to deactivate this function, for example, when the subwoofer switches the power on
unexpectedly by sensing noises from other appliances.
Notes
• This function does not operate when the POWER switch is set to the OFF position, or when you manually set the
subwoofer to the standby mode by pressing the STANDBY/ON switch.
• Noise received from other appliances may extend the time period before the subwoofer places itself in the standby
mode to more than 8 minutes.

Changing the AUTO STANDBY setting

13
En