Replacing The Starter Rope And Rewind Spring - Stihl MS 192 Instruction Manual

English
On all spark plugs
Always press the boot (2) firmly on
N
to the spark plug (3).
32
Replacing the Starter Rope
and Rewind Spring
Replacing a broken starter rope
2
1
1
3
Take out the screws (1).
N
Remove the fan housing from the
N
crankcase.
4
Use a screwdriver or suitable pliers
N
to remove the spring clip (2) from
the starter post.
Carefully remove the rope rotor with
N
washer (3) and pawl (4).
WARNING
The rewind spring may pop out and
uncoil during this operation – take care
to reduce risk of injury.
Replacing the starter rope
Use a screwdriver to pry the rope
N
out of the starter grip.
Remove the remaining rope from
N
the rotor and starter grip.
1
1
Thread the new rope through the
N
starter grip and tie one of the special
knots shown.
Pull the knot back into the grip.
N
4
MS 192 C