Replacing The Starter Rope And Rewind Spring - Stihl MS 362 C-Q Instruction Manual

English
WARNING
If the spark plug comes with a
detachable adapter nut (1), screw the
adapter onto the thread and tighten it
down firmly to reduce the risk of arcing
and fire.
Installing the Spark Plug
Screw home the spark plug, fit the
N
boot and press it down firmly.
Fit the shroud.
N
36
Replacing the Starter Rope
and Rewind Spring
1
Removing the shroud
Move the Master Control lever to
N
stop position (0)
Push the hand guard forward – the
N
chain is locked.
1
Open the twist locks (1) by turning
N
them 1/4 turn counterclockwise with
the combination wrench.
Remove the shroud (2).
N
Removing the fan housing
1
Take out the screws (1).
N
Push the hand guard upwards.
N
Pull the underside of the fan
2 N
housing away from the crankcase
and remove it downwards.
1
Replacing a broken starter rope
Use a screwdriver or suitable pliers
N
to remove the spring clip (2) from
the starter post.
Carefully remove the rope rotor with
N
washer (3) and pawls (4).
The rewind spring may pop out and
uncoil during this operation – take care
to reduce risk of injury.
1
1
2
3
4
4
WARNING
MS 362 C-Q
1
1