Table of Contents
Advertisement
5. CHOOSE THE OPENING(S)
Remove the knockout(s) for the chosen opening(s) (horizontal at the back of the hood or vertical on top). See illustrations below.
V
ERTICAL DISCHARGE
H
ORIZONTAL DISCHARGE
Punch out the appropriate electrical knockout hole on
top (A) or back (B) of the hood. Install the wire clamp
(included in parts bag).
6. REMOVE THE FILTERS AND THE GREASE DRIP RAIL
NOTE: For 36" wide double blower hood, the adapter is
taped on top of the filters. Remove adapter and
set aside before removing filters.
A. Remove tape on filters.
Remove filters from hood and set aside.
NOTE: It is recommended to start with the
middle one(s).
B. Lift out grease drip rail (1) and set aside.
7. REMOVE THE ADAPTER
For all hoods, except the 36" wide double blower hood, remove the adapter (1), or
adapter/damper, taped inside the hood.
(INTERNAL BLOWER(S) HOOD ONLY)
1
1
HR0021
A
HD0250
HD0578
(INTERNAL BLOWER HOOD ONLY)
8
2
2
1
A
HD0581
3
3
B
B
1
Advertisement
Table of Contents
