Table of Contents
Advertisement
15. INSTALL THE BLOWER
Refer to instructions included with blower.
Plug the 3-prong plug cord from rough-in plate to the 3-prong male connector inside the
hood (A) and the 2-prong male connector cord from rough-in plate to the 2-prong plug
inside the hood (B).
Do not plug both cords together.
16. REINSTALL GREASE DRIP RAIL AND BAFFLE FILTERS
Reinstall grease drip rail. The illustration at right shows how to reinsert the grease drip rail
into the range hood.
Remove protective plastic film covering filters before installing them.
It is recommended to install side filters first and
finish with center one(s).
1.
Insert one end of the filter into the upper
channel of the hood.
2.
Raise the other end toward the inside of hood
and insert in the grease drip rail of the hood.
17. LED LIGHTING
The lighting of this hood is produced by two LED modules (included).
Do not touch lamps during or soon after operation. Burns may occur. Cannot be replaced by any other type of light
bulb or LED module.
(EXTERIOR OR IN-LINE BLOWER)
WARNING
!
CAUTION
1
HD0655
WARNING
!
HE0078
12
B
HD0654
2
A
Advertisement
Table of Contents
