Table of Contents
Advertisement
18
• Place the toekick against the chassis cover,
Step
• Hang the access panel assembly on the screw
Install
• Secure the assembly with the original Phillips
Toekick
and
Access Panel
The supplied toekick may be covered with a
Optional
custom toekick to match surrounding
Custom
cabinetry.
Toekick
BEFORE YOU BEGIN:
1. Install the supplied toekick as described
2. Compare the toekick depth of the dish-
3. The difference will determine the thickness
4. Cut the custom toekick to fit the width of
A continuous toekick, bridging the dishwasher
cutout can be used if cabinet toekick depth is
not less than the dishwasher depth. Secure the
continuous toekick in such a manner that it
could be removed if service is required.
Finalize
• Turn on the hot water shut-off valve and
Installation
• Operate dishwasher through one cycle and
• Leave Installation Instructions and Use &
• Discard any unused parts.
aligning screw holes.
with the spacer ring. The lip of the assembly
will slip into the notch on the ring.
head color matched screws.
above.
washer to the toekick depth of the
cabinetry. Cabinet toekick depth will vary
among manufacturers.
of the custom material to be used.
the dishwasher opening.
electrical supply.
check for plumbing leaks.
Care literature with the owner.
Installation
Stainless Steel Interior Dishwashers
Chassis Cover
Toekick
Access Panel
21
Advertisement
Table of Contents
