Before you begin-Read these instructions completely and carefully.
IMPORTANT: Save these instructions for local inspector's use.
IMPORTANT: OBSERVE ALL GOVERNING CODES AND ORDINANCES.
NOTE TO INSTALLER: Be sure to leave these instructions with the Con-
sumer.
NOTE TO CONSUMER: Keep these instructions with your Use and Care
Book for future reference.
This appliance must be properly grounded. See "Electrical Supply", page 6.
CAUTION
WARNING
If the dishwasher is a new installation most of work must be done before the
dishwasher is moved into place. If the dishwasher is replacing another
dishwasher the connections for the dishwasher being replaced must be
checked for compatibility with this dishwasher and replaced as necessary.
Contents
If you have a question concerning the installa-
tion of this product, call the GE Answer
®
Center
Consumer Information Service at
800.626.2000, 24 hours a day, 7 days a week.
Consumer must supply custom panels.
Before you begin: Make sure that custom
panels are available. Custom panels must be
installed onto the dishwasher before final
installation. If they are not, the dishwasher
will have to be removed from under the
counter to install these panels.
Models ZBD4600X and ZBD4700X have a
finished front door and access panel. 1/4"
thick custom panels may be installed onto
these models.
Preparation
If you received a damaged
dishwasher, you should
immediately contact your
dealer or builder.
Models ZBD4800X does not have a finished
door or access panel. A custom 3/4" thick
door and access panel must be supplied by
the consumer.
Installation instructions for both 1/4" and
3/4" thick custom panels are included in
this booklet.
Installation - All Models
2