Konica Minolta bizhub C250 User Manual page 343

Various Settings
3
Touch [Release Held Job].
The Release Held Job screen appears.
4
From the job list, select the job whose sample copy is to be printed, se-
lect [Proof Print], and then touch [OK].
– Check the print results on the printed pages.
5
From the job list, select the job that you want to print.
– To change the settings of the printing conditions, continue with
step 6.
– If you are not changing the settings of the printing conditions, skip
to step 9.
6
Touch [Change Setting].
The Change Setting screen appears.
– If the job to be removed from the Held Job list is not displayed,
touch [
– To change the settings of or cancel multiple jobs together, select
one job, and then touch the next jobs.
– If an incorrect job was selected, touch the button for the selected
job again to deselect it.
7
Change the printing conditions on the Change Setting screen, and then
touch [OK].
The Change Setting screen appears again.
8
To apply the changes to the settings, touch [OK].
The Release Held Job screen appears again.
9
Select [Print], and then touch [OK].
The stored job is changed to an active job, then printed.
– To cancel printing of the job, touch [Cancel].
C250
] or [ ] until the desired job is displayed.
10
10-108