Konica Minolta bizhub C250 User Manual page 76

Setting Up Network Printing
8
In Administrator mode of PageScope Web Connection, select "Net-
Ware Setting" from the Network tab, and then specify the following set-
tings.
IPX Setting: Select "ON".
Ethernet Frame Type: Select "Auto". (Select the frame type according
to the network environment.)
NetWare Print Mode: Select "Nprinter/Rprinter".
Printer Name: Specify the printer name.
Printer Number: Specify the printer number (0-255). When 255 is spec-
ified, the setting is "Auto".
9
Restart this machine (turn it off, then on again).
– When turning the power off, then on again, be sure to turn the sub-
power switch off first, then the main power switch. In addition, wait
at least 10 seconds before turning the power on again; otherwise,
this machine may not function properly.
10
Use the NetWare server console to display the print server screen, and
then check that the created printer is shown as "Waiting for Job" for
the connected printer (0).
C250
3
3-21