Display Modes; About Radio Reception-Dcf77 - Oregon Scientific RM338SP User Manual

DISPLAY MODES

The RM338SP supports 4 display modes in the sequence of
:
MODE 1. Hour-Minute-Second (of local time)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Day-Month (of local time)
MODE 2. Hour-Minute-Day-of-the-Week (of local time)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Day-Month (of local time)
MODE 3. Hour-Minute-Day-of-the-Week (of local time)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hour-Minute (of second time zone)
MODE 4. Hour-Minute-Day-of-the-Week (of second time
zone)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Day-Month (of second time zone)
Each press on the [MODE] BUTTON will toggle the display
in the above order.
Note that the second line of the display will be replaced by
the alarm time if the [
ABOUT RADIO RECEPTION - DCF77
The RM338SP is designed to automatically synchronize its
clock once it is brought within range of the Frankfurt DCF77
radio signal. It scans 6 times a day.
When the RM338SP is within range, its radio-control mecha-
nism will override all manual settings.
When the unit is receiving
RECEPTION SIGNAL will start to blink. A complete
reception generally takes about 2 to 10 minutes, depending
on the strength of the radio signal. After that, the hourly
scanning will only take a few seconds.
When the reception is complete, the RADIO RECEPTION
SIGNAL will stop blinking. The strength of the reception for
4
] BUTTON is pressed.
a radio signal, the RADIO