Display Modes - Oregon Scientific rm318p User Instructions

DISPLAY MODES

The RM318P supports four display modes in the sequence
of :
MODE 1. Hour-Minute-Second (of local time)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Day-Month (of local time)
MODE 2. Hour-Minute-Day-of-the-Week (of local time)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Day-Month (of local time)
MODE 3. Hour-Minute-Day-of-the-Week (of local time)
-------------------------------------------
Hour-Minute (of second time zone)
MODE 4. Hour-Minute-Day-of-the-Week (of second
time zone)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Day-Month (of second time zone)
Each press on the [MODE] BUTTON will toggle the
display in the above order.
Note that the second line of the display will be replaced by
the alarm time if the [
ABOUT RADIO RECEPTION - DCF77
The RM318P is designed to automatically synchronize its
clock once it is brought within range of the Frankfurt
DCF77 radio signal. It will scan and adjust every full hour.
When the RM318P is within range, its radio-control mecha-
nism will override all manual settings. Time will start to run
from 00:00:00 and date, 1-1 (January 1), Monday.
When the unit is receiving radio signal, the RADIO RE-
CEPTION SIGNAL will start to blink. A complete recep-
tion generally takes about 2 to 10 minutes, depending on the
strength of the radio signal. After that, the hourly scanning
will only take a few seconds.
When the reception is complete, the RADIO RECEPTION
4
] BUTTON is pressed.