Connecting To An Iphone/Ipad (Usb To Device, Usb To Host Terminals); Wireless Lan Settings - Yamaha Portable Grand DGX-660 Owner's Manual

Connecting to an iPhone/iPad
(USB TO DEVICE, USB TO
HOST terminals)
By connecting this instrument to a smart device, such
as an iPhone or iPad, you can use apps on that device
together with the instrument for a variety of musical
purposes, take advantage of various convenient func-
tions, and get more enjoyment out of this instrument.
Make connections by using one of the following
methods.
NOTE
• Before using the USB TO DEVICE terminal, be sure to read
"Precautions when using the USB TO DEVICE terminal" on
page 80.
• Connect to the USB TO DEVICE terminal via the
USB wireless LAN adaptor UD-WL01 (sold sepa-
rately; may not be available in some areas).
• Connect to the USB TO HOST terminal via the
USB cable for iPhone/iPad.
For details on connections, refer to the "iPhone/iPad
Connection Manual" on the website (page 8) and the
"Wireless LAN Settings" (See next section).
For information about the compatible smart devices
and application tools, access the following page:
http://www.yamaha.com/kbdapps/
NOTICE
• Do not place your iPhone/iPad in an unstable position.
Doing so may cause the device to fall and result in dam-
age.
NOTE
• When you use the instrument along with an application on
your iPhone/iPad, we recommend that you first set "Airplane
Mode" to "ON" then set "Wi-Fi" to "ON" on your iPhone/iPad
in order to avoid noise caused by communication.
• Certain applications may not be supported in your area.
Please check with your Yamaha dealer.
Connections – Using Your Instrument with Other Devices –

Wireless LAN Settings

By using the USB wireless LAN adaptor UD-WL01
(sold separately), you can connect the instrument to
an iPhone/iPad via a wireless network. For general
operating instructions, refer to the "iPhone/iPad Con-
nection Manual" on the website (page 8). This section
covers operations that are specific to this instrument.
Choosing the Connection Type
You can use one of connection modes: Infrastructure or
Access Point. Select one which is most suitable for your
network environment.
Infrastructure mode: The "Infrastructure" mode uses
an access point for data communication, between the
USB wireless LAN adaptor UD-WL01 and a net-
work.
Access Point mode: The "Access Point" mode allows
you to directly connect the USB wireless LAN adap-
tor UD-WL01 and your iPhone/iPad, without using
an access point. Please note that when your instru-
ment is set to Access Point mode, no Internet access
is available on your iPhone/iPad, limiting part of
their functions, such as mailing and searching.
1
Turn off the power to the instrument.
2
Connect the USB wireless LAN adaptor
UD-WL01 to the USB TO DEVICE termi-
nal of the instrument.
3
Turn on the power to the instrument.
4
Press the [FILE CONTROL] button to call
up the FILE CONTROL display.
DGX-660 Owner's Manual
77