Yamaha Portable Grand DGX-660 Owner's Manual page 15

6
y
5 x 16 mm
roundhead
screws
Post-assembly checklist
Once you've assembled the stand, check the following
points:
• Are there any parts left over?
 If so, read the assembly instructions again and cor-
rect any errors you might have made.
• Is the instrument clear of doors and other movable fix-
tures?
 If not, move the instrument to an appropriate loca-
tion.
• Does the instrument make a rattling noise when you
play it or move it?
 If so, properly tighten all screws.
• Also, if the keyboard makes a creaking noise or seems
unsteady when you play it, refer carefully to the assem-
bly instructions and diagrams and retighten all screws.
6
Install the keyboard to the stand.
Fix the keyboard to the angle brackets, using the
screws y .
Keyboard Stand Assembly
DGX-660 Owner's Manual
15