Exiting The Power Saver Mode; System Power On Procedure - Xerox 6204 User Manual

Exiting the Power Saver Mode

The Power Saver mode may be exited either manually or automatically.
Manual Method: With the machine in the Power Saver mode, press the illuminated <Power Saver>
button. The button's indicator light will extinguish, the touch screen will display the message Warming
Up, and the machine will begin its warm up cycle.
Automatic Method: The machine will exit the Power Saver mode when it detects a print job in the
active queue.

System Power On Procedure

The procedure below describes the process for powering up the system from a cold start, that is, it
assumes that both the printer and the controller are powered down completely.
1. Move the printer circuit breaker switch up, to the On [
2. Move the printer power switch to the On [
2 Power Switch
1 Circuit Breaker
Downloaded From ManualsPrinter.com Manuals
<Power Saver>
] position.
|
] position.
|
Xerox 6204 Wide Format Solution
Printer User Guide
Product Overview
2-33