Xerox 6204 User Manual page 69

3. Select the feature to set up.
1. Key Press
A single, short tone will sound when the user makes a valid selection of a key on the control panel or a
button on the touch screen.
2. Invalid Entry
A short tone followed by a slightly longer tone will sound when the user makes an invalid selection on
the control panel or touch screen.
3. Fault
Five sets of five warning tones will sound when the controller detects a fault condition, such as a jam,
toner low or empty condition, media out condition, etc.
4. Machine Ready
Two medium length tones indicate that the machine is in a ready state.
4. Select [Off] or [On].
Note
[On] enables a tone; [Off] disables it.
5. Select [Save].
Downloaded From ManualsPrinter.com Manuals
Xerox 6204 Wide Format Solution
Printer User Guide
System Setup
3-11