Initial Setup At The Control Panel; Assigning The Printer's Network Address - Xerox Phaser 6128MFP User Manual

Initial Setup at the Control Panel

This section includes:
•
•
•
The first time you turn the printer on, the Initial Setup menu will provide you with an
opportunity to:
•
•
•
•
Note:
System button, then Admin Menu > System Setup > Power On Wizard.

Assigning the Printer's Network Address

The printer is set by default to be automatically recognized by the network, acquiring an IP
address using DHCP. Network addresses assigned by DHCP are temporary. After a specified
time, the network may assign a new IP address to the printer.
If your network administrator requires a static IP addresses for the printer, or you do not
want the IP address of the printer to change, you must assign a network address to the
printer manually.
Allowing the IP Address to be Assigned Automatically
If your printer is connected to a network that has a DHCP server, an IP address will be
assigned when you turn the printer on.
If you are connected to a network that does not have a DHCP server, and you want the IP
address assigned automatically, do the following:
1. On the control panel, use the up or down arrow to select Network Settings from the
2. Select AutoIP from the list, and press the OK button.
3. Use the down arrow to select Exit Menu, then select Yes to exit the menu.
An IP address will be assigned when you turn the printer on.
Note:
System Setup > Power On Wizard.
Specifying a Static IP Address
To assign a static IP address to the printer:
1. On the control panel, use the up or down arrow to select Network Settings from the
2. Select Panel from the list, and press the OK button.
Downloaded From ManualsPrinter.com Manuals
Assigning the Printer's Network Address
Enabling the Printer for Faxing
Enabling the Printer for Scanning
Set the language, date, and time.
Change the network address acquisition method.
Specify the fax phone number, so the printer can receive a fax.
Set up advanced fax settings.
After you have exited the Initial Setup menu, you can return to it by pressing the
Initial Setup menu.
To return to the Initial Setup menu, press the System button, then Admin Menu >
Initial Setup menu.
Phaser® 6128MFP Multifunction Printer

Initial Setup at the Control Panel

on page 28
on page 29
on page 30
28