Basic Copying - Xerox Phaser 6128MFP User Manual

Basic Copying

Use either the document glass or the document feeder to make copies. Load the originals
to be copied and follow the steps below to make copies. To clear the settings from the
previous job, press the Clear All button once.
Document Glass
Lift the document feeder or the document glass
cover, and then place the original facedown on
the back, left corner of the document glass.
1. On the printer control panel, press the Copy button.
2. Enter the desired number of copies using the printer control panel keypad. The number
3. Set copying options. See
4. Press the green Start button.
If you placed originals in the document feeder, copying continues until the document
feeder is empty.
Note:
printer scans the originals. When the copies are ready to print, the print job pauses, the
copies print, and then the print job resumes. Copying cannot be performed while printing a
received fax.
Note:
Downloaded From ManualsPrinter.com Manuals
of copies appears on the upper, right corner of the display. To reset the number of
copies to 1, press the Clear All button.
Print jobs are interrupted when users make copies. Printing continues while the
One set of copies will print if the green Start button is pressed.
Phaser® 6128MFP Multifunction Printer
6128mfp-055
Document Feeder
Insert originals faceup with the top of the page
entering the feeder first. Adjust the paper guides so
they fit against the originals.
Adjusting Copying Options
70
Basic Copying
6128mfp-126
on page 71.