Symbols - RIDGID R4092 Operator's Manual

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
V
A
Hz
min
n o
.../min
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates important information not related to an
injury hazard, such as a situation that may result in property damage.
NAME
Safety Alert
Read Operator's
Manual
Eye, Ear, & Breathing
Protection
Wet Conditions Alert
No Hands
Electrocution
Volts
Amperes
Hertz
Minutes
Alternating Current
No-Load Speed
Per Minute
DESIGNATION/EXPLANATION
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Always wear eye protection with side shields marked to comply with
ANSI Z87.1 along with hearing and breathing protection.
Do not expose to rain or use in damp locations.
Failure to keep your hands away from the wheel will result in
serious personal injury.
Failure to properly ground can result in electrocution.
Voltage
Current
Frequency (cycles per second)
Time
Type of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
6 — English