Sliding Table - RIDGID R4092 Operator's Manual

ASSEMBLY
INSTALLING/REMOVING THE FRAME AND

SLIDING TABLE

See Figures 21 - 23.
 Pull the frame lock lever out and turn 90˚ counterclockwise
to the "unlocked position".
 Release the lever.
 Grasp the sliding table firmly and guide the table and
frame onto the rails of the base.
 Holding the table and frame parallel with the base, push
the table and frame toward the back of the saw.
SAW
SLIDING
FRONT
TABLE AND
FRAME
FRAME LOCK
LEVER
UNLOCK
FRAME LOCK
LEVER
Fig. 21
SLIDING TABLE
AND FRAME IN
LOCKED POSITION
SLIDING
TABLE
FRAME
Fig. 22
NOTE: The table and frame should move smoothly over
the rollers inside the rails.
To lock the frame:
 Pull the frame lock lever out and turn 90˚ clockwise to
the "locked position".
 Release the lever.
NOTE: When the sliding table and frame are installed,
and you push the frame, it will "click" into place. This
is the frame lock lever snapping into a hole in the frame
locking it in place.
To unlock the frame:
 Pull the frame lock lever out and turn 90˚ clockwise to
LOCK
the "unlocked position".
To lock/unlock the sliding table:
 Lock the frame.
 Pull the table lock knob out and up to unlock the sliding
table.
 To lock the sliding table, move the table to the front of
the frame until the table lock knob snaps into place.
To remove the frame and sliding table:
 Lock the sliding table.
 Pull and hold the frame lock lever out.
 Move the sliding table and frame to the front of the saw
and remove.
LOCK
SLIDING
TABLE
18 — English
UNLOCK
TABLE
LOCK
KNOB
FRAME
Fig. 23