Overlapped Server/Clerk Entry - Sharp UP-X300 Instruction Manual

Overlapped Server/Clerk Entry

This function allows you to switch from one server/clerk to another server/clerk and to interrupt the first
server/clerk's entry, so the second server/clerk can do his or her entry in this mode. Interrupt handling is
possible only in the overlapped server/clerk entry.
Procedure
(1) Sign on the server/clerk. (
(2) Enter the password (if it is required).
(3) Make item registrations
(4) Sign on another server/clerk. (
(5) Enter the password (if it is required).
(6) Enter items and perform the finalization.
(7) Sign on the original server/clerk. (
(8) Enter the password (if it is required).
(9) Continue entering transaction.
NOTE
• The overlapped server/clerk entry is not allowed while the tendering sale is going on.
• In the network system when the server/clerk is signed on, if the server/clerk have been already signed on
at another terminal, the server/clerk may be automatically signed off and may be signed on at the
designated terminal (by system programming). (Remote automatic server sign-off)
➝ ➝
server/clerk code
➝
server/clerk code
➝
server/clerk code
[CLK #])
➝
[CLK #])
➝
[CLK #])
103