Table of Contents
Advertisement
• PLU code entries
Procedure
For "preset only type":
For "open only type":
For "open and preset type":
For "open and preset type":
• PLU code: max. 5 digits
• Open unit price: Within the programmed HALO/LALO
NOTE
• When the [PLU/SUB] key is touched without a PLU code entry, the query window is displayed. Then
enter the PLU name followed by the [ENTER] key. (
• After entering the PLU code for an "open only type" or "open and preset type", the ten-key window is
displayed. Then enter the unit price followed by the [ENTER] key (open price), or touch the [ENTER] key
(preset price).
• UPC entries
Procedure
By scanning UPC code:
By UPC code entry:
• UPC code: max. 13 digits
NOTE
• When the [PLU/SUB] key is touched without a UPC code entry, the query window is displayed. Then
enter the UPC name followed by the [ENTER] key. (
• When you enter or scan an undefined code, (if the terminal is programmed for the learning function as
"yes",) you are required to enter its unit price and the associated department.
(Undefined UPC entry)
➝
selection)
[ENTER]
26
➝
➝
PLU code
[PLU/SUB]
➝
➝
PLU code
[PLU/SUB]
➝
➝
PLU code
[PLU/SUB]
➝
➝
PLU code
[PLU/SUB]
➝
Ä
(Scan UPC code)
➝
➝
UPC code
[PLU/SUB]
➝
➝
Unit price
[ENTER]
➝
➝
Unit price
[ENTER]
➝
➝
Unit price
[ENTER] (open price entry)
➝
[ENTER] (preset price entry)
➝
➝
[PLU/SUB]
PLU name
➝
➝
[PLU/SUB]
UPC name
➝
➝
Dept. code
[ENTER]
➝
[ENTER] )
➝
[ENTER] )
➝
(Delete/ no delete
Advertisement
Table of Contents
