Nectre MK1 LE Operating Instructions Efficient—Warm—Friendly Keep instructions in a safe place for future reference Do not throw away Pecan Engineering Pty Ltd proudly supports the activities of Landcare Australia through its membership of the AHHA...
USER INSTRUCTIONS 1. INTRODUCTION AIR CONTROLS Before use of this appliance please read these instructions The Nectre MK1 LE has two air controls for controlling the fully. fire. WARNING: ANY MODIFICATION OF THE APPLIANCE THAT Top air slide:- This allows air to enter the firebox from...
Light the paper or firelighters. 2. USING APPLIANCE FOR FIRST TIME 4. Once the fire has taken hold add larger pieces of wood. For optimal burn conditions, place the logs in a First few times the appliance is lit, it will give off some front to back orientation (right angles to the door odorous fumes.
For the optimum between clean burning, and getting Flue Draught the best in efficiency from the heater, from the fully The flue has two main functions:- closed position, open the top air slide 4-5mm (bottom air slide is shut). To remove smoke, gases and fumes from the appliance.
11. TROUBLESHOOTING TIPS 9. CLEANING PAINT WORK & GLASS 1. Glass in door blackening The appliance, when cool, can be cleaned with a damp cloth. This can have several possible causes: Over the years, the black paint will fade and can be Burning unseasoned wood —...
3. REPLACEMENT OF BAFFLE PLATES The purpose of the firebricks in the appliance is to increase The Nectre MK1 LE is fitted with two thick steel baffle thermal mass and to guarantee the longevity of the steel plates which help to retain the heat in the firebox by firebox.
4. FITTING A NEW DOOR GLASS 7. REPLACEMENT OF ASH PLATE This task may be easier with the door removed from the The ash plate acts to protect the front of the firebox below appliance and laid horizontally on a work-bench. the door opening from the hot coal bed and fire.
WARRANTY Pecan Engineering Pty. Ltd. warrants this stove to be able to operate under normal use and service and within 10 years from the date of the original purchase on the terms herein shall repair or replace without cost to the original customer any part thereof which shall be returned to our factory, transportation charges prepaid and which our inspection shows would prevent operation.