Table of Contents
Advertisement
Before use
∫ For Windows ME
1) Connect the PC to the AG-MX70 correctly.
2) Turn on the power to the PC.
Check that Windows has started up.
3) Place the setup CD-ROM in the PC's CD-ROM drive.
4) Turn on the power to the AG-MX70.
After a short while, the "Add New Hardware Wizard"
dialog will be displayed.
5) Select "Automatic search for a better driver," then
click on the "Next" button.
6) When the screen indicating that the installation is
complete is displayed, click on the "Finish" button.
∫ For Windows XP
<Note>
Be sure to log on as a user with Administrator rights when
installing this software.
1) Connect the PC to the AG-MX70 correctly.
2) Turn on the power to the PC.
Check that Windows has started up.
3) Place the setup CD-ROM in the PC's CD-ROM drive.
4) Turn on the power to the AG-MX70.
After a short while, the "Found new hardware wizard"
dialog will be displayed.
5) Select "Install the software automatically," then click
on the "Next" button.
6) If the installation warning screen is displayed, click on
the "Continue Anyway" button.
7) When the screen indicating that the installation is
complete is displayed, click on the "Finish" button.
78
Hide quick links:
Advertisement
Table of Contents
