Table of Contents
Advertisement
Specifications
[VIDEO INPUT/OUTPUT]
Analog component input/output connectors:
Analog composite input/output connectors:
YC input/output connectors:
EXT (external input) connector:
G/L input connector:
Preview output connector:
Advanced reference input connector:
[AUDIO INPUT/OUTPUT]
Analog audio (L/R) connectors:
AUX input (L/R) connectors:
Audio output (L/R) connectors:
Mic input jack:
Headphone output jack:
[OTHER]
Editor:
Connectable Editor:
Tally Out:
GPI:
USB:
BNC a 4 (sources 1/2/3/4)
Y:
1.0 Vp-p, 75 h
Pb/Pr (525): 0.525/0.757 Vp-p switchable, 75 h
Pb/Pr (625): 0.7 Vp-p, 75 h
BNC a 8 (sources 1 to 8), 1.0 Vp-p, 75 h
Mini-DIN4 a 4 (sources 1/2/3/4)
Y:
1.0 VP-P, 75 h
C:
0.286 VP-P, 75 h (525)/0.3 VP-P, 75 h (625)
BNC a 1 (Y/Pb/Pr), Analog component signals
Y:
1.0 Vp-p, 75 h
Pb/Pr (525): 0.757 Vp-p, 75 h
Pb/Pr (625): 0.7 Vp-p, 75 h
Key:
BNC a 1, 1.0 Vp-p, 75 h
Analog composite signals (genlock possible)
BNC a 1 (with loop-through configuration), 1.0 Vp-p, 75 h
Composite signal (genlock selection enabled from G/L, EXT-Key)
BNC a 1, 1.0 Vp-p, 75 h
BNC a 1 (with loop-through configuration), 75 h,
composite signals
Sync: 0.286 Vp-p (525)/0.3 VP-P (625)
Burst: 0.286 Vp-p (525)/0.3 Vp-p (625)
XLR a 4 sets, +4/0/–3 dBu switchable, 10 kh, balanced
RCA a 2 sets, –10 dBV, 10 kh, unbalanced (AUX2 switchable
with MIC)
Program 1: XLR a 1 set, +4/0/–3 dBu switchable, 47 h,
balanced
Program 2: RCA a 1 set, 10 dBv, 47 h, unbalanced
M6 a 1, –60 dBv, 2 kh, unbalanced (switchable with AUX2)
M6 a 1, 8 kh, unbalanced
D-sub 9-pin, RS-422A/232C switchable
RS-422A protocol; GVG/Sony switchable
Panasonic: AG-A850, AJ-A900,
SONY:
BVE-2000, BVE-910, PVE-500
D-sub 9-pin, open-collector k 8 ch
Collector current: Less than 50 mA,
Maximum voltage: 35 V DC
BNC k 1, Make-contact
Type-B connector k 1, USB Ver.1.1 (cable length: max. 3 m)
98
Hide quick links:
Advertisement
Table of Contents
