Weee; Spare Parts; Electrical Schematic; Accessories - Lincoln Electric LINC FEED 37 Operator's Manual

WEEE

Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2012/19/EC on Waste Electrical and Electronic Equipment (WEEE)
and its implementation in accordance with national law, electrical equipment that has reached the end of its
life must be collected separately and returned to an environmentally compatible recycling facility. As the
owner of the equipment, you should get information on approved collection systems from our local
representative.
By applying this European Directive you will protect the environment and human health!

Spare Parts

Part List reading instructions
•
Do not use this part list for a machine if its code number is not listed. Contact the Lincoln Electric Service
Department for any code number not listed.
•
Use the illustration of assembly page and the table below to determine where the part is located for your particular
code machine.
•
Use only the parts marked "X" in the column under the heading number called for in the assembly page (# indicate
a change in this printing).
First, read the Part List reading instructions above, then refer to the "Spare Part" manual supplied with the machine, that
contains a picture-descriptive part number cross-reference.

Electrical Schematic

Refer to the "Spare Part" manual supplied with the machine.

Accessories

K10347-PG-xxM Source/wire feeder cable (gas). Available in 5, 10, 15m
(CV AIR power source, INVERTEC V350-PRO power source only).
K10347-PGW-xxM Source/wire feeder cable (gas and water). Available in 5, 10 or 15m.
K10370-PG-xxM Source/wire feeder cable (gas). Available in 5, 10, 15m
(INVERTER STT II power source only).
K10158 Plastic adaptor for 15-kg coils.
K10343 Innershield torch adaptor
K10353-1 Remote control box for LF30/31/37/38 with cable.
Solid wires:
KP14017-0.8 0,6 ÷ 0,8mm
KP14017-1.0 0,8 ÷ 1,0mm
KP14017-1.2 1,0 ÷ 1,2mm
KP14017-1.6 1,2 ÷ 1,6mm
Aluminum wires:
KP14017-1.2A 1.0 ÷ 1.2mm
KP14017-1.6A 1.2 ÷ 1.6mm
Cored wires:
KP14017-1.1R 0.9 ÷ 1.1mm
KP14017-1.6R 1.2 ÷ 1.6mm
English
LF 37 & 38: Drive rolls and guide tubes 4 driven rolls
13
07/06
12/05
English