Menu Settings; Making Settings In The Menu; Example: Changing The Master Tuning; Saving A Tone - Roland AE-10 Owner's Manual

Menu Settings

Making Settings in the Menu

Tone name/
Menu item
Tone number/
Value
Pressing the [MENU] button, you can various settings.
1
Press the [MENU] button to display the menu screen.
Use the [ C ] [ A ] buttons to select the
2
menu item, and then press the [MENU]
button.
3 Use the [ C ] [ A ] buttons to change the
value.
4
To return to the tone selection screen, press the [TONE]
button.

Example: Changing the Master Tuning

Here's how to change the tuning of the Aerophone. The displayed
value is the frequency of the A key. With the factory settings, the
Aerophone's tuning is set to A=440.0 Hz, but you can change this to
some other tuning such as 442.0 Hz.
1
Press the [MENU] button.
Use the [ C ] [ A ] buttons to select
2
" M.Tuning ," and then press the [MENU]
button.
3 Use the [ C ] [ A ] buttons to change the
tuning.
You can adjust the tuning in the range of 415.3 Hz–440.0 Hz
(default)–466.2 Hz (in 0.1 Hz steps).
6

Saving a Tone

[MENU] button
[ C ] [ A ] buttons
System settings and tone settings
There are two types of settings: system settings and tone settings.
5 System settings are common to all tones. These settings are saved
5 Tone settings are for an individual tone. When you change a tone setting, it is
1
2
3
4
5
6
2
Items indicated by the symbol in "Menu List" (p. 7) are "tone
settings. " If you want to save the tone settings, save them as a user
tone as described below.
automatically when you change them.
not saved automatically; it is saved when you save the tone.
Long-press the [MENU] button.
The lower line shows the save-destination user tone number.
Use the [ C ] [ A ] buttons to change the
user tone number of the save destination.
Press the [MENU] button.
Rename the tone (16 characters).
Move the cursor
Change the character
Delete
Insert
Press the [MENU] button.
A confirmation message appears.
To execute the write, press the [ A ] (Y)
button.
If you decide to cancel the write, press the [ C ] (N) button.
* Never turn off the power while data is being saved.