Table of Contents
Advertisement
Menu
Value
Default
AUTO,
AUTO
Bite Adj
-50–0–+50
AUTO,
AUTO
BiteSens
-50–0–+50
1–16
1
MIDI Ch
FctReset
Version
Explanation
Bite Sensor Center Adjustment
This lets you adjust the normal state of the bite sensor (which detects the strength with which you bite the mouthpiece).
Typically, you'll set this to "AUTO" so that the sensitivity is adjusted automatically when the power is turned on.
If you want to adjust it manually, proceed as follows.
1
Set the value to 0.
2
Bite the mouthpiece with normal strength, and blow.
Sound is heard only in this state
3
If sound is heard only when you bite harder than normal, decrease the value.
If sound is heard only when you bite less than normal, increase the value.
Bite Sensor Sensitivity Setting
This lets you adjust the sensitivity of the bite sensor (which detects the strength with which you bite the mouthpiece).
Typically, you'll set this to "AUTO" so that the sensitivity is adjusted automatically when the power is turned on.
If you want to adjust it manually, proceed as follows.
1
Set the value to 0.
2
Play while changing the force with which you bite the mouthpiece.
3
If the bite sensor has too much effect, decrease the value.
If the bite sensor does not have enough effect, increase the value.
MIDI Transmit Channel Settings (MIDI Transmit Ch)
This setting specifies the MIDI channel on which the unit will transmit.
This unit will receive all sixteen channels (1–16).
Returning to the Factory Settings (Factory Reset)
Here's how to return the Aerophone to its factory-set state.
1
Select "FctReset" in the upper, and then press the [MENU] button.
A confirmation message appears.
2
To execute the Factory Reset, press the [A] (Y) button.
If you decide to cancel, press the [C] (N) button.
Version Information
Displays the version of the unit's system program.
Basic state
Menu Settings
S
S
–
9
Hide quick links:
Advertisement
Table of Contents
