Panasonic RAMSA WR-DA7 User Manual page 60

23. New Threshold level adjustment of analog input PEAK/SIGNAL LEDs
Previous Versions: The Threshold of the PEAK/SIGNAL LED was fixed at
-6.0dB.
Version 2.0: The Threshold of the PEAK/SIGNAL LED can now be adjusted
from -10dB through 0.0dB. In the [UTILITY>OSC/BATT] window, there is a
[PEAK LED THL] knob with a value in middle level of right side.
Cursor to the [PEAK LED THL] knob, and operate JOG dial. Factory
Default value is -6.0dB.
24. Correction of freezing when faders are moved manually during
Automation playback
Previous Version: While Automation is being played back, if you manually
move the faders, the DA7 will occasionally freeze-up and stop all functions.
This is most likely to occur when FADER FADE events (not FADER events) are
playing back.
Version 2.0: This has been resolved.
3 - 1 8
[UTILITY>INPUT MTX] window