Important Notes - Panasonic RAMSA WR-DA7 User Manual

Important Notes:

Due to the fact that there are many new default settings in the Version
2.0 upgrade, we are recommending that you do a Master Reset of the
console after the upgrade. Therefore you should backup any settings
in the Libraries, Scene Memories, Mixes, etc. BEFORE you begin the
upgrade process. Instruction for this process can be found in Section
1. After the upgrade, make certain that you look at the MIDI REMOTE
and INPUT MTX windows on the LCD to see if they are properly
assigned. If they are not, please reset them to your desired settings or,
do a master reset to the console to return the DA7 to the new factory
default settings.
There are several updates to the default settings that may have an affect on
the settings in your console. This will protect you from accidental erasure of
any of your presets. After the upgrade, simply restore the data you have
saved following the instructions in Section 1.
If you are planning to use our optional automation software package (MAX),
please be aware that you must be running at least O.S. Version 1.10 for it to
operate properly, and we recommend that you upgrade your DA7 to Version
2.0 for optimum performance.
Some of the features documented here are from intermediate upgrade
versions. If you are upgrading your console from Version 1.01 or 1.02, all of
the features in this document will apply to you. If you have previously
upgraded your console to Version 1.10-1.20-1.21 or 1.22, you have already
been using some of the features documented here in Section 2.
If you are upgrading from version 1.21 or 1.22, you should follow all the
instructions in Section 1, and then you may proceed directly to Section 3.
Contents:
Section 1 - Upgrade Utility instructions
Section 2 - Upgrade from Version 1.01/1.02/1.10/1.20
Section 3 - Upgrade from Version 1.21 or 1.22
Section 4 - APPENDIX - New Default Settings
6