Operating The Da7 Upgrade Utility - Panasonic RAMSA WR-DA7 User Manual

Upgrade utility for audio mixer version 2.0
Hide thumbs Also See for RAMSA WR-DA7:
Table of Contents

Advertisement

Operating the DA7 Upgrade Utility

Menu window
Start by displaying the [Menu] window -[DA7 Upgrade Utility] -on your
computer. Select the function that you want to perform by pressing:
Set Up, Version, Backup, Upgrade, Restore or Exit.
[Setup]
This button accesses the [Setup] window. This is where you
select the Serial Ports and the MIDI Channels to be used for
transmitting and receiving data with the DA7.
[Version]
This button accesses the information about the software version
that currently resides within your DA7.
[Backup]
This button accesses the area where you begin the process of
backing up the data from the DA7, and where you select the
types of data (such as Mixes, Scene Memories, etc) to be backed
up.
[Upgrade] This button accesses the area where you begin the process of
upgrading the software in the DA7 (An upgrade takes
approximately 20 minutes). The upgrade procedure begins by
restarting the DA7. You will then receive messages that display
both on the computer monitor and the LCD panel of the DA7
with instructions for upgrading the console.
[Restore]
This button accesses the area where you begin the process of
restoring the user data that was saved in the backup operation.
[Exit]
This button closes the DA7's Upgrade Utility.
1 - 7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents