Panasonic AJ-SD255 Operating Instructions Manual page 31

Setup menus (continued)
USER menu <AUDIO>
No./Item
734 This selects whether the operation of
the MONITOR SELECT button on the
MONI SEL front panel is to be enabled or
INH disabled.
0000 OFF : Operation is enabled.
0001 ON : Operation is disabled.
0002 ON1 :
Operation is disabled in the FULL
display mode and enabled only in the
FINE display mode.
750 This selects the audio output level
during DV playback.
DV PB ATT
0000 OFF :
The audio output level is not
attenuated.
0001 ON :
The audio output level is attenuated
(reduced).
751 This selects whether to mute the
sound where recordings are joined
REC PT during DV/DVCAM
MUTE
0000 OFF : The sound is not muted.
0001 ON : The sound is muted.
752
This selects the AUDIO CH1 and CH2
output signals during DV or DVCAM
DV OUTPUT
format playback.
0000
The CH1 track signals are output to
CH1 and the CH2 track signals to
CH2. (Only the sound during shooting
is output.)
0001
The CH3 track signals are output to
CH1 and the CH4 track signals to
CH2. (Only the audio dubbing sound is
output.)
0002 ST1+2 :
The mixed CH1 and CH3 track signals
are output to CH1 and the mixed CH2
and CH4 track signals to CH2. (The
sound during shooting and audio dubbing
sound are output simultaneously.)
Note:
This menu item takes effect only when a
DV or DVCAM cassette tape with a 32
kHz/4-channel recording is played back.
For setting the audio reference level.
753
REF LEVEL (For AJ-SD255P)
0000 FS-20 : –20 dB
0001 FS-18 : –18 dB
0002 FS-12 : –12 dB
The underlined items indicates the initial setting.
Description
ST1 :
ST2 :
(For AJ-SD255E)
0000 FS-20 : –20 dB
0001 FS-18 : –18 dB
0002 FS-12 : –12 dB
31