Stihl MS 200 T Instruction Manual page 21

Cranking
N Pull the starter grip slowly with your
left hand until you feel it engage –
and then give it a brisk strong pull
and push down the top handle at the
same time. Do not pull out the
starter rope to full length – it might
otherwise break. Do not let the
starter grip snap back. Guide it
slowly back into the housing so that
the starter rope can rewind properly.
Machines without additional manual fuel
pump: If the engine is new or after a long
out-of-service period, it may be
necessary to pull the starter rope several
times to prime the fuel system.
MS 200 T
When the engine begins to fire:
1
N Set the Master Control lever (1) to
the starting throttle position ( n ).
N
Hold and start your saw as
described.
As soon as the engine runs
1
2
N Blip the throttle trigger (2). The
Master Control lever (1) moves to
the run position F and the engine
settles down to idling speed.
N Pull the hand guard toward the top
handle.
The chain brake is now disengaged –
your saw is ready for operation.
English
19