Raymarine T210 User Manual page 28

Maxi Display
3. Remove the four captive M4 nuts from the plastic moulding and
attach the display to the mounting surface using the four self tapping
screws provided.
4. Check the display is perfectly level; carefully position the button
insert into the slot and snap the facia back into position.
Where access is available to the rear of the mounting surface
Warning: do not bolt through from the front or replace the plastic nuts
with metal nuts. This may cause the moulding to crack and will invalidate
your warranty.
This method allows for maximum security of a permanently mounted
display. Position the supplied template carefully before starting. Use
bolts of a suitable length inserted from the rear. The internally fitted
plastic nuts will prevent overtightening.
Note: If the internal plastic nuts are displaced or become damaged,
remove the bezel as described above and replace with the spare nuts
provided.
Warning: take care not to drop the button pad.
26 www.tacktick.com