Raymarine T210 User Manual page 23

Maximum Speed
Average Speed
Maximum True Wind Speed
Race Chapter
Trends
When set to OFF, trend/acceleration arrows are not shown.
When set to ACCEL, acceleration arrows are shown.
The three values ACCEL L, ACCEL M & ACCEL H indicate LOW,
MEDIUM and HIGH sensitivity.
When set to TREND, trend arrows are shown.
The three values TREND-L, ACCEL M & ACCEL H indicate LOW,
MEDIUM and HIGH sensitivity.
See page 9 for details of trend/acceleration functions.
Tack to Tack Correction
www.tacktick.com
Clears the Maximum Speed memory; resets to the current
speed.
Clears the Average Speed memory; resets to the current speed.
Resets the Maximum True Wind Speed memory; resets to the
current true wind speed.
Sets the functionality of Trend or Acceleration arrows for the
Speed, SOG, VMG-WIND and VMG-WP pages.
The options are: OFF, ACCEL-L, ACCEL-M, ACCEL-H,
TREND-L, TREND-M and TREND-H.
A value that corrects the speed displayed when the boat is on
starboard tack, to take account of inherent differences of the
measured speed on opposite tacks, e.g caused by off-centre
installation of the transducer.
By default the correction is zero,
Setup and Calibration
21