Programs, Projects And Firmware; Program Checks - Crestron TPMC-9 Operation Manual

Crestron TPMC-9
Crestron Studio /
SIMPL Windows
Crestron Studio / VT Pro-e
Firmware
Cresnet Connections
Ethernet Connections
Operations Guide – DOC. 6965E

Programs, Projects and Firmware

Program, project or firmware files may be distributed from programmers to installers
or from Crestron to dealers. Firmware upgrades are available from the Crestron Web
site as new features are developed after product releases. One has the option to
upload programs and projects via the programming software or to upload and
upgrade via the Crestron Toolbox. For details on uploading and upgrading, refer to
the Crestron Studio help file, SIMPL Windows help file, VT Pro-e
Crestron Toolbox help file.
If a Crestron Studio (or SIMPL Windows) program is provided, it can be uploaded to
the control system using Crestron Studio (or SIMPL Windows) or Crestron Toolbox.
Upload the Crestron Studio (or VT Pro-e) file to the touch screen using Crestron
Studio (or VT Pro-e) or Crestron Toolbox.
Check the Crestron Web site to find the latest firmware. (New users must register to
obtain access to certain areas of the site, including the FTP site.)
Upgrade TPMC-9 firmware via Crestron Toolbox.
1. Establish communication with the TPMC-9 and display the "System Info"
window.
Select Functions | Firmware... to upgrade the TPMC-9 firmware.
2.

Program Checks

Actions that can be performed on the TPMC-9 vary depending on whether it is
connected via Cresnet or Ethernet.
For Cresnet connections, using Crestron Toolbox, display the network device tree
(Tools | Network Device Tree View) to show all network devices connected to the
control system. Right-click on the TPMC-9 to display actions that can be performed
on the TPMC-9.
For Ethernet connections, display the "System Info" window (Tools | System Info)
and select the Functions menu to display actions that can be performed on the
TPMC-9.
Be sure to use the internal setup menu (refer to "IP Table" which starts on page 14)
or Crestron Toolbox to create the TPMC-9 IP table. In Toolbox:
1. Select Functions | IP Table Setup.
2. Add, modify or delete entries in the IP table.
3. A defined IP table can be saved to a file or sent to the device.
Edit the control system's IP table to include an entry for the TPMC-9. The entry
should list the TPMC-9's IP ID (specified on the TPMC-9's IP table) and the internal
gateway IP address 127.0.0.1.
9" Tilt Touch Screen
®
help file or the
9" Tilt Touch Screen: TPMC-9 • 27