10Bit Color Signal Input - Eizo RadiForce R31 User Manual

2-4. 10bit Color Signal Input

• Before a 10bit color signal can be input, your graphics board must configured. For
details, refer to the user's manual for the graphics board.
• For more on connecting the monitor and computer, refer to "2-2. Single Link Cable
Connection" (see p. 13)
• If the image does not display correctly, verify the "Signal Selection" settings.
Verifying "Signal Selection" Settings
(1) Turn off the monitor's power by touching the power switch.
(2) Touch the power switch while touching the mode switch.
The "Signal Selection" menu appears on the screen.
Enter Switch
Mode Switch
(3) Select "Single Link/10bit" and touch the enter switch.
Power Switch
Power Indicator
Directing Switches
Si g nal Selection
"
2. CABLE CONNECTIONS
English
menu
"
19