Table of Contents
Advertisement
Note
f The above initial setting screen is the one displayed when the projector is turned on for the first time after purchase. When [ALL USER
DATA] is executed from the [SETUP] menu → [INITIALIZE], the [STANDBY MODE] setting before the execution is displayed.
Initial setting (time zone)
Set [TIME ZONE] according to the country or region where the projector is used.
Once the initial setting is completed, setting can be changed from the [SETUP] menu → [DATE AND TIME].
The current settings are displayed in the [LOCAL DATE] and the [LOCAL TIME]. If a change is necessary, set with
the [SETUP] menu → [DATE AND TIME] after completing the initial setting.
1)
Press qw on the remote control to switch the setting.
2)
Press the <ENTER> button on the remote control.
f Confirm the setting value and complete the initial setting.
Note
f In the factory default setting, the time zone of the projector is set to +09:00 (Japan and Korean Standard Time). Change the time zone
according to the region where you use the projector.
Chapter 3 Basic Operations — Turning on/off the projector
INITIAL SETTING
TIME ZONE
LOCAL DATE
LOCAL TIME
Please set up a time zone according to
the area of your country or region.
SET
ENTER
4/4
◀
+09:00
▶
2014/01/01
00:00:00
CHANGE
ENGLISH - 49
Advertisement
Table of Contents
