Table of Contents
Advertisement
Chapter 2 Getting Started — Installing/removing the projector
f The string is used to prevent the adapter cover from falling off. Be sure to use the projector with the string
put on the connector secure lock.
String
8)
Align the orientation of the power supply unit to the track system.
f Align the side with the levers A/B to the side with the groove of the track system.
Lever A
9)
Mount the track mount part of the power supply unit to the track system.
f Insert the hook clasps of the track mount parts A/B into the opening of the track system.
f Mount the power supply unit to the track system in the right direction. Mounting it in the wrong direction may
damage the track system or the track mount parts A/B when operating the levers A/B in Step 10).
f The track mount parts A/B and the adapter of the projector cannot be mounted to the position of the tapping
screw fixing the track system to the ceiling or beam.
10) Align the lever A parallel to the track system, and completely turn the lever B to the same side.
i) Turn the lever A in the direction of the arrow shown in the figure to align it parallel to the track system.
ii) Completely turn the lever B in the direction of the allow shown in the figure.
f Be sure to operate the lever A first.
Tab
Track system
Lever B
Power supply unit
Groove
ENGLISH - 35
Advertisement
Table of Contents
