Table of Contents
Advertisement
Attention
f When you turn on the projector, be careful so that the eyes of people around the projector are not exposed to the sudden light from the light
source.
Or operate the projector only if the eyes of people around the projector are not exposed to the light from the light source even when
projection starts suddenly.
[Tools] page
Click the [Tools] tab on the operation page.
1
[Control System]
Sets the information required for communicating with the
controller to be connected with the projector.
2
[User Password]
Sets the user rights password for the Crestron Connected
operation page.
3
[Admin Password]
Sets the administrator rights password for the Crestron
Connected
operation page.
TM
[Info] page
Click the [Info] tab on the operation page.
1
[Projector Name]
Displays the projector name.
2
[Mac Address]
Displays the MAC address.
3
[Lamp Hours]
Displays the runtime of the light source.
4
[Power Status]
Displays the status of the power.
130 - ENGLISH
Chapter 5 Operations — Web control function
1
2
3
4
4
Network status
Displays the settings of wired LAN.
[DHCP]
Displays the current setting value.
[IpAddress]
TM
Displays the current setting value.
[SubnetMask]
Displays the current setting value.
[DefaultGateway]
Displays the current setting value.
[DNSServer]
Displays the current setting value.
5
[Exit] button
Returns to the operation page.
5
[Source]
Displays the selected image input.
6
[Lamp Mode]
Displays the light source mode.
7
[Error Status]
Displays the error status.
8
[Exit] button
Returns to the operation page.
1
2
3
4
5
4
5
6
7
8
Advertisement
Table of Contents
