Pan/Tilt Orientation; Zoom Orientation; Display Orientation; Pan/Tilt Angle Range - Chauvet Maverick MK2 Wash User Manual

Pan/Tilt To set whether the pan or tilt orientation is normal or inverted:"
1.
Orientation
2.
3.
4.
5.
Zoom To set whether the zoom goes from wide to narrow or from narrow to wide, follow the instructions
below:
Orientation
1.
2.
3.
4.
5.
Display To set which way the display faces, do the following:
1.
Orientation
2.
3.
4.
5.
To set the range of motion the pan or tilt is permitted:
Pan/Tilt Angle
1.
Range
2.
3.
4.
5.
To set whether the product will black out during pan or tilt movement, follow the instructions below:
Blackout on
1.
Pan/Tilt
2.
Movement
3.
4.
5.
If the touchscreen is not responding correctly, it may need to be calibrated. To do so:
Touchscreen
1.
Calibration
2.
3.
4.
5.
6.
Maverick MK2 Wash User Manual Rev. 1
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Pan Reverse or Tilt Reverse, or touch the display where it
says the desired setting.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal orientation) or YES (inverted
orientation), or touch the display where it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Zoom Reverse, or touch the display where it says Zoom
Reverse.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (wide to narrow) or YES (narrow to
wide) or touch the display where it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Screen Reverse, or touch the display where it says Screen
Reverse.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display is normal), YES (display is
inverted), or AUTO (the display automatically detects which way the product is facing and
orients itself accordingly), or touch the display where it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Pan Angle or Tilt Angle, or touch the display where it says the
desired setting.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 540 (540°), 360 or 270 (360° or 270° for
pan or tilt respectively) or 180 (180°), or touch the display where it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select BL. O. P/T Move, or touch the display where it says BL. O. P/T
Move.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out
during movement), or touch the display where it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Calibration, or touch the display where it says Calibration.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not calibrate) or YES (calibrate),
or touch the display where it says the desired option.
Press <ENTER>.
Follow the instructions, touching the points as they appear on the display.
Operation
-35-