VTech VC7151 User Manual page 76

I cannot receive
alerts when the
monitored garage
door, in-house door,
window, or medicine
cabinet is opened.
I want to replace an
old sensor with a
new one.
The answering
system does not
announce the correct
day of the week for
recorded messages
time stamp.
The answering
system does not
answer after correct
number of rings
or does not record
messages.
I accidentally set my
LCD language to
Spanish or French,
and I don't know
how to change it
back to English.
Make sure the sensor alert system is in armed
mode and that
If the icon does not appear on the display, press
ARM to turn on the sensor alert system.
For various alerts behavior, please check the
settings of alert notifications (page 34) and
individual sensors' alert schedule (page 31 to 33).
To replace a sensor, you must deregister the
registered sensor first, and then register the new
sensor to your ULE compatible product.
Press MENU when the phone is not in use.
1.
Enter the code *33734# to access the
2.
DEREGISTER menu.
Scroll to Single sensor, and then press
3.
SELECT.
4. Scroll to the sensor you want to deregister,
and then press SELECT.
YES
5. Press
The telephone base shows SENSOR X is
deregistered and you hear a beep when the
deregistration process completes.
Make sure you have set the date and time. See
Configure your telephone section.
Make sure the answering system is on. When
the answering system is on, the telephone base
and handset show ANS ON and the
indicator on the telephone base is on.
If toll saver is selected, the number of rings
changes to two when there are new messages.
While the handset is not in use, press
and then enter 364
LCD language back to English.
72
L R
or appears on the display.
to confirm the deregistration.
to change the handset
/ANS ON
MENU