VTech VC7151 User Manual page 33

Hide thumbs Also See for VC7151:
Table of Contents

Advertisement

NOTES
At the last 10 seconds of exit delay time, there will be a beep every second.
When a delay time has been set, there will not be any local or remote call
alerts when a monitored garage door, in-house door, window, or medicine
cabinet is open, or when there is motion in the monitored area, during the
delay time.
If you are not able to exit home before the delay time ends, you can restart
the delay time again when you are ready to leave:
- switch the sensor mode to Local, and then switch it back to Remote; or
- press DISARM to switch the sensor alert system to Disarmed,
and then press ARM to switch it back to Armed.
The delay time set will be activated when:
- the sensor mode is switched to Remote from the Armed-Local
mode; or
- the sensor alert system is switched to Armed from the Disarmed-Remote
mode.
MODE
1.
Press
Scroll to choose Remote, and then press OPTIONS.
2.
3.
Scroll to choose Set delay and then press SELECT.
Scroll to choose On, and then press
4.
choose the exit delay time.
To skip time delay setting, scroll to choose Off, and then
press SELECT.
5. Scroll to choose 3 minutes, 5 minutes or 8 minutes, and then
SELECT
press
6. Scroll to choose 0 minutes, 1 minute or 3 minutes, and then
SELECT
press
on the handset or telephone base when idle.
to proceed to choose the entrance delay time.
to save the delay time.
SELECT
29
to proceed to

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vc7151-101Vc7152-301Vc7151-109Vc7152-201

Table of Contents