SCREW
3 IN.
(76mm)
Figure 6.4. Elbow Heat Shield Installed
WARNING! Risk of Fire! Do not remove heat shield. El-
evated header temperatures may cause a fi re.
2 SCREWS
Figure 6.5 For top vent, remove the two screws holding
the top heat shield in place. For rear vent, see next page.
Figure 6.6 Rotate the top heat shield to the vertical
position as shown above. The heat shield must remain in
the vertical position.
Majestic • QUARTZ32, QUARTZ36 Installation Manual • 2412-980 Rev. H • 10/16
2 SCREWS
Figure 6.7 Replace the two screws as shown.
Figure 6.8 Remove the seal cap.
Figure 6.9 Remove the insulation basket and white insu-
lation from the center vent pipe.
37